

The scanner bed is A4 in size and 600 x 600 dpi in resolution, which is as expected. The ADF is quite large and capable of copying a stack of 50 A4 sheets, but it can only copy one side, unlike many of its competitors. Verify that the computer and printer connect to the same wireless network.įor macOS, verify that the wireless router supports Bonjour.Connectivity: Ethernet, Wi-Fi, Wi-Fi Direct, USBĬonsumables included: 4x cartridges (enough for 750 mono or 500 colour pages)ĭimensions/Weight: 411 x 394 x 344 mm (WxDxH)/19.4kg Verify that you have selected the correct printer port.

Verify that the print driver is installed on the computer. Many devicesĬan interfere with the wireless signal including motors, cordless phones, security system cameras, other wireless networks, Verify that the printer is located away from electronic devices that might interfere with the wireless signal. Make sure poles, walls, or support columns containing metal or concrete do not separate the printer and wireless access point. Remove any large metal objects between the access point and the printer. Verify that obstacles do not block the wireless signal. For most networks, the printer must be within 30 m 100 ft of the wireless access point (wireless router). Verify that the printer is within the range of the wireless network. Verify that the encryption method (AES or TKIP) is the same for the printer as it is for the wireless access point (on networks If the network has InternetĪccess, try connecting to the Internet over a wireless connection. If the wireless network is working correctly, try accessing other computers on the wireless network. If the security information is incorrect, run the

With secured networks, verify that the security information is correct. Sure the SSID is correct, run the wireless setup again. Print a Configuration Page to determine the SSID. Verify that the service set identifier (SSID) is correct. Also make sure that the wireless radio in the Verify that the printer and the wireless router are turned on and have power. Verify that the network cable is not connected.
